ZOSI VIEW app for PC Archives

Category Archives: Apps for PC

This article works for the following models of DVRs / POE NVRs / Wireless NVRs:

4-Channel DVRs / POE NVRs / Wireless NVRs:

ZR04ZN;   ZR04ZM;   ZR04FN;   ZR04FM;   ZR04CN;   ZR04CM;   ZR04JS;   ZR04TS;   ZR04TN

ZR04RN;   ZR04RM;   ZR04EN;   ZR04EM;   

ZR04DS;   ZR04MS;  

8-Channel DVRs / POE NVRs / Wireless NVRs:

ZR08ZN;   ZR08ZM;  ZR08FN;   ZR08FM;   ZR08BN;   ZR08BM;   ZR08CN;   ZR08CM;   ZR08KS;   ZR08TN

ZR08RN;   ZR08RM;   ZR08EN;   ZR08EM;      

ZR08DS;   ZR08DP;   ZR08MS;   

16-Channel DVRs:

ZR16ZK;   ZR16JK;   ZR16BK;   ZR16CK

(You can find the model number on the label at the bottom of the DVR.)

1. First, please make sure you have installed an internal hard drive inside your DVR.

    The max hard drive size supported by our DVR is 6TB.

    Note: 1. Our DVR can't support the external hard drive to record, and without a hard drive, it cannot record and playback.

              2. Before recording, please go to DVR's Main Menu - Disk Management to format the hard drive. 

             3. Please tick the hard disk's ID, then click "Format" to format the hard drive.

                 After formatting, please click "Apply" to save the setting.

2. If your DVR system without a hard drive, and you want to install your own internal

     hard drive, the below video is for your reference:  

    (1). How to install hard drive?

    (2).How to format the hard drive:

3. Manual Record,  Schedule Record and Motion Detection Record.

A. Manual Record

    If you want the system to record 24/7, you need to set up the record manually.

    (1). Please go to DVR's Main Menu - Setup - Record to enable the channels you want to

           record. Then click "Apply" to save the setting.

(2). Please return to the main menu, you will find "Start Record" / "Stop Record" button,

       please select "Start Record", after that, you will find a green icon on the channels you

       selected to record, the system will record all the time. 

B. Schedule Record

    If you want to turn off manual recording, and set the timer for Schedule, you can follow up the below steps to set up:

    (1). Please go to DVR's menu, click "Stop Record".

    (2). Please go to DVR's Main Menu - Setup - Schedule to set up schedule recording.

Note:  1. please select the channel you want to set up schedule recording.

            2. Set time period：please click  on the upper right corner, then select the

               corresponding time to click the grid, you will find the grid is covered with blue.

               The time that is covered by blue is the time of video recording. 

               The  is to erase the area. 

           3. If you want another channel to set up the same time period, please select the

               channel, then click "Copy". After finishing, please click "Apply" to save the

               setting.

           4. Or you can move the mouse arrow to the grid area, then double click the left button

              on the mouse, you will find the schedule, you can add the time period manually.

After that, you will find a blue icon on the channel when it starts recording.

C. Motion Detection Record

    If you want to turn off manual recording, and leave the DVR to record only when it detects

    motion, you can follow up the below steps to set up:

    (1). Please go to DVR's menu, click "Stop Record".

    (2). Please go to DVR's Main Menu - Setup - Alarm - Motion Detection to enable

           the channel you want to set up motion detection, and edit the area for the channel.

    (3). Please go to DVR's Main Menu - Setup - Alarm - Motion - Trigger - To record to check

          whether you enabled the record.

    (4). Please go to DVR's Main Menu - Setup - Schedule - Motion to check if all channels were

          covered with blue. If yes, you needn't change it.

(5). You will find a yellow icon and red man on the channel that you set up to motion detection 

       record.

4. Playback

A. You can click "Playback" to play back the recording files directly, but you can't select

    the specific time to playback.

B. You can also go to DVR's Main Menu - Search - Time Search to select the specific time to

     playback the recording.

Note: 1. " " is to select the channel you want to playback.

          2. "" is to select multiple channels to playback at the same

               time. But four channels is the maximum.

          3. "" is to play the recording files.

Ivideon is one of the best app for video surveillance, remote video monitoring and video recording for security cameras, DVRs and NVRs.
It will allow you to keep tabs on things while you’re away with event notifications and recordings stored either locally or in the Ivideon cloud.

Ivideon easily supports both single and multiple locations and tracks what matters to you no matter where you are, keeping you updated on important events in real time and storing those events in the cloud for easy access.

Ivideon is scalable, simple and reliable. From a webcam to monitor a home to an IP-camera network serving an international business, Ivideon can handle it.

Every day, more than 2,000,000 individuals and businesses use Ivideon to:

• access high-quality video online (with sound) via any standard connected device including Android
• record and store video in the cloud with guaranteed reliability and data security
• receive automatic push- and e-mail notifications of suspicious movements or sounds
• quickly search and view recorded surveillance video
• access quality video over any bandwidth down to 3G
• easily expand to any number of cameras
• share camera access with PTZ, Archive, and Live options
• transfer and store data securely
• embed surveillance feeds on websites or blogs
• share camera links over social networks
• search video events linked to POS, Access Control and Home Automation systems

Ivideon is safe. Ivideon is simple to install and maintain. And Ivideon is accessible from anywhere. But with all the functionality of more expensive and complex solutions.

And if you get stuck, our Helpdesk is on stand-by 24/7.

Camera connection
Big-name cameras like iLuv, Oco, Philips, Axis, Dahua, Hikvision, Milesight—and many others—love Ivideon right out of the box. Plug and play – no computer needed.

But all cameras—D-Link, Foscam, Trendnet, EasyN, Acti, Edimax, Swann, TP-Link, Logitech, Belkin and many others—can be configured to work with Ivideon quickly and easily. All you need is a computer with an Internet connection and to download our free Ivideon Server app here: http://www.ivideon.com/get/. In five minutes you’re good to go.

See how easy it is for free!